Instructions for hydrogel usage(with pictures)：
(1)Wash your hands and apply normal saline to the wound.
(2)Wait for the area around wound to dry, then take a piece of hydrogel( preferably 1-2cm larger than the wound) , take off the release paper on one side and cover the wound completely.
(3)Take off the release paper on the other side and gently press the PU membrane and make sure it had sealed the wound completely.
(4)Remove the transparent film on the outside and make sure that the hydrogel is properly placed.
(5)When the hydrogel had fully absorbed the tissue drainage(the dressing no longer stick and swells), replace the hydrogel with a new piece.
Intructions (with pictures)：
(1)After determining position of the wound, tear off the longer edge release paper.
(2)Align the dressing to the wound and ensure that the dressing completely covers the wound.
(3)Remove the release paper of shorter and make sure that the PU film has tightly covered the wound’s exteriors.
(4)Press the PU film lightly to determine the peripheral adhesion.
(5)Remove the ultra-thin transparent film on the outer side.
(6)Remove the ultra-thin transparent film on the outer side of the outer layer.
(7)Cconfirm that the dressing has been covered in place.
(8)Hydrogel dressing patch completion picture.
